ProShark+

Industry First ONLY from Procubed

ProShark+ is a wireless protocol analyzer for IEEE 802.15.4 and supports full decode of Wi-SUN Alliance Field and Home Area Network (FAN and HAN) specific packets. ProShark+ comprises of hardware and software to capture and decode IEEE802.15.4 packets. The captured packets are displayed in the Wireshark GUI after parsing. The hardware provided is a USB dongle which can be easily plugged into any PC. The PC based GUI software captures the packets exchanges over air and feed to Wireshark to decode the captured packets. The ProShark+ GUI gives user flexibility to select the port to which dongle is connected, select the PHY mode, Data rate and the channel on which user wants to capture the packets.

^
Real time packet sniffing
^
Graphical protocol analyser
^
essential tool for application developers
^
Can be used to demonstrate the compliance
^
Raw Binary message viewer

Procubed Test Bed Controller

Industry First ONLY from Procubed

  • The Pro-TBC is a Test infrastructure which is used for Automated testing for Wi-SUN FAN.
  • Used by CISCO to validate the Certification of  IR509 WPAN Industrial Router and by ITRON Bridge5-WS
  • The tool is designed using Java Script.
  • The tool can be configured for multi-layer testing. The tool can issue command which can be issued to different layers within the stack.
  • User can add/remove/modify the commands supported by the Test Hardware.
  • User can add/remove/modify the Test device in the test bed and configure it.
  • User can define a set of Test configuration common to all test setup.
  • User can add/remove/modify the test cases to be tested as part of the test infrastructure.
  • The test application running over Embedded stack in the MCU handles the communication between the Pro-SVS and the Stack.
  • The Pro-SVS communicates with the Hardware using UART or ethernet interface.
  • The communication over UART between the hardware and the PC tool is verified using a protocol defined by Procubed which includes checksum also.
  • The communication over ethernet interface is trough RESTful interface.
  • It can be used to test each primitives individually.

Procubed Test Bed Controller

 

The Pro-TBC can be configured and customized for different test requirement.

A variant of Pro-TBC is customized as Wi-SUNG FAN Test Bed Controller. It is also approved by Wi-SUN Alliance and being used as the certification tool for Wi-SUN FAN Profile.

Procubed Stack Validation Suite

  • The Pro-SVS is a Test infrastructure which is used for manual unit testing.
  • The tool can be configured for multi layer testing. The tool can issue command which can be issued to different layers within the stack.
  • The user can define it own test cases and the results expected using xml interface.
  • The test application running over Embedded stack in the MCU handles the communication between the Pro-SVS and the Stack.
  • The Pro-SVS communicates with the Hardware using UART or ethernet interface.
  • The communication over UART between the hardware and the PC tool is verified using a protocol defined by Procubed which includes checksum also.
  • The communication over ethernet interface is trough RESTful interface.
  • It can be used to test each primitives individually.
  • User can add/remove/modify the commands supported by the Pro-SVS.

Procubed Stack Validation Suite

 

The tool can be configured for RF Testing like TELECT-108, FCC etc.

It can also be configured to do individual layer unit testing.

A variant of Pro-SVC is customized as Wi-SUN PHY Test Tool. Different test labs are using this tool for Wi-SUN PHY certification for USA, Japan, EU#1, EU#2, INDIA and Singapore band.